4 Common Water Heater Problems And How To Fix Them

If you’re dealing with a faulty water heater, there are a few things you can do to get it back up and running. These may include draining it or replacing the anode rod.

If you’re having trouble with your water heater, it’s a good idea to call a professional for help. These professionals can identify the root of your issue, repair it and ensure it’s working properly again.

Water Heater Leaks

A leaky water heater can cause serious damage to a home’s walls, floors, and other important belongings. However, most water heater leaks can be fixed with a bit of troubleshooting knowledge and the right tools.

First, check the plumbing pipes above the water heater for any signs of leaking. This is the area where hot and cold water enters the tank to be heated, and then reaches your plumbing fixtures as needed.

If you see a pool of water above the tank, it could be caused by flexible supply tubes, which are often vulnerable to leaks due to high pressure. Use a stepladder and inspect these pipes to determine if they have sufficient seals or are showing signs of rust.

If your leak is originating from the temperature and pressure relief valve, it may need to be replaced. This valve helps depressurize the tank, reducing the water’s pressure and protecting it from overheating.

Water Heater Not Heating

If you have a water heater that’s not producing hot water, there could be many reasons. Some of them are easy fixes while others require professional help.

One possible reason is that the pilot light on a gas water heater has gone out. The pilot light is a small flame that ignites when the water heater needs to heat up the water inside the tank.

The pilot light also keeps the gas valve closed to prevent gas from building up in the tank. It can go out for a variety of reasons, including a leak in the gas line or a problem with the pilot light thermocouple or thermopile.

The first step to fixing this issue is to check the power supply. For electric water heaters, make sure that the circuit breaker is on and the fuses are not blown.

Water Heater Not Turning On

A water heater not turning on can be a frustrating experience. Fortunately, there are a few things that you can try before calling a plumber.

First, check the breaker for power to the water heater. If it is tripped, switch the breaker off and back on again to see if that helps.

If that does not help, you may need to replace the thermostat. The thermostat is the device that controls the temperature of your hot water.

Another problem that can prevent your water heater from working is a damaged flow sensor. This is a safety device that prevents your gas from flowing too quickly to the burner and pilot light.

This can be caused by a number of different issues, including a gas leak or a faulty gas valve. To find out if these are the issue, you can call your gas company and a licensed technician will be able to tell you what to do.

Water Heater Not Working

When your water heater isn’t producing hot water, it can be an annoying and frustrating problem. However, there are a few things that you can check to determine if your unit is in need of Houston water heater repair.

First, check to see if it’s getting power. This can be done with a circuit tester or with a digital multimeter that measures voltage and resistance.

Another possibility is that your thermostat isn’t working. This is a common issue, and usually can be fixed with the help of an electrician or plumber.

If you have a gas unit, check to make sure that your pilot light is lit and that the burner is working properly. If it isn’t, the heating element needs to be replaced.

Finally, if you’ve checked the above and your water heater is still not producing hot water, it may be a dip tube problem. This is a component that moves water to the bottom of the tank where it’s heated, so problems with this can cause your water heater to stop functioning.